SR1008: 10m x 8m Stage Roof

The SR1008 roof system is a tower based structure with a pitched roof for optimum strength. The towers and roof are constructed entirely using Eurotruss HD34 truss, which as a heavy duty truss offers a loading/rigging capacity higher than often found on this size of stage.

Unlike our larger Layher based structures, this stage has an independent 32ft x 26ft Litedeck platform, most often at a height of around 5ft (1.5m) to the ground, however as an independent platform both the size, shape, and height of this are all variable.

The roof is covered in PVC, with back and side walls available either in PVC or a semi transparent mesh.

PA wings are also available for this structure in widths of either 2m, 3m, 4m or 5m. Each wing can support a single point load (such as a hang of line array PA) of up to 1 tonne per side, or it can be used to support an LED video screen. For larger with there is a rear wing tower brace used to transfer wind loads down to the ground behind the stage.

Access to the stage is available through either the rear or side walls of the stage as suits your site and production requirements. We offer a variety of layout and design options for access to the stage including load ramps, pedestrian steps, and can build a truck dock to provide a flat load from vehicles straight to the load ramp.

Ballast is located at the base of the towers – this can comprise of concrete blocks, water-filled containers or ground anchors as best suits.

We will fully manage the structure, to ensure full safety of all performers and crew throughout, together with compliance with all legislation and licensing requirements during the planning stages.